Darning
stsitch
A-26 A-27
D
3. -7.0
.0-2.0
Select pattern 26 or 27 from the Group
Patterns "A" to get the darning stitch.
Change the presser foot to the buttonhole
foot.
1
Baste the upper fabric and the under fabric
together. Select the needle position. Lower
the presser foot over the center of the tear.
1
2
Pull the button holder to rear.
Set the button guide plate on buttonhole foot
to the desired length.
2
a
Start
b
3
Stop
3
The size of one darn cycle is variable.
However, the maximum stitch length is
2.6cm (1 inch) and the maximum stitch width
is 7mm (9/32 inch).
a. The length of sewing.
b. The width of sewing.
To Next Page
Loading...
