Empstorm EM-04E - Make Espresso; Using the Porta-Filter for Nespresso Capsules

coffee maker stops working automatically , and the corresponding coffee button indicator will off.
1-cup button again to start dispensing coffee, when the specified time is reached, press 1 cup
button to complete setting which can be memorized by the unit. Working duration for 1-cup
coffee can be set up to 45s.Press and hold 2-cup button for 3 seconds, 2-cup button flashes,
entering setting mode, press 2-cup button again to start dispensing coffee, when the specified
time is reached, press 2 cup button to complete setting which can be memorized by the unit.
Working duration for 1-cup coffee can be set up to 90s
.
WARNING:
Do not leave the coffee maker unattended during making coffee, as you need operate
6. Press and hold 1-cup button for 3 seconds, 1-cup button flashes, entering setting mode, press
manually sometimes!
7. After finish making coffee, take metal funnel out by turning it clockwise, then pour coffee residue
out with steel mesh pressed by press bar.
8. Let them cool down completely, then rinse under running water.
USING THE PORTA-FILTER FOR OriginaILine NESPRESSO ® CAPSULES
Note: The filter only matches Nespresso® capsules.
1. Lift the lid of the OriginaILine Nespresso® capsule filter. Place the OriginaILine Nespresso®
capsule inside the filter and then close the lid.
2. Set the OriginaILine Nespresso® capsule filter into capsule funnel, then put the capsule funnel under
the metal funnel holder ,then insert the funnel into the appliance from the “
” position, and fix them
into coffee maker firmly by turning it anticlockwise until it is at the “
” position.
3. place the hot cup (yourself cup) on removable cup shelf.
4. After preheating is completed, you should press 1-cup or 2-cup coffee button , wait for a moment,
there will be coffee flowing out.working time for 1-cup coffee is 15 seconds and 25 seconds for 2-cup