Diadynamic Set-up (970 only)
‘Type’: The diadynamic waveform may be selected by touching the ‘Type’
button. The full range of diadynamic waveforms is available: DF - diaphasé
fixe, MF - monophasé fixe, CP - modulé en courtes périodes, Cpiso -
modulé en courtes périodes isodynamique, RS - rythme syncopé and LP -
modulé en longues périodes. Full details of these waveforms are given in
the technical specification section of this manual.
‘Polarity’: This reverses the polarity of the waveforms (see technical
spec.). If the ‘Autorev’ option is selected, the polarity of the output will
automatically reverse halfway through the selected treatment time.
To Next Page
Loading...
