Medi-Wave Set-up (960 and 970)
‘Frequency’: Touching this button opens this window:-
The frequency may be set from 2 to 60 Hz in 1Hz increments.
‘Mode’: Normally Medi-Wave stimulation is used in continuous mode - that
is with no modulation (none). In addition, burst and surged modes are also
available. In burst mode the burst rate is 2 Hz for pulse frequencies greater
than 20 Hz and the pulse frequency divided by 10 for frequencies less than
20 Hz. The duty cycle of the burst is 50%. In surge mode the surge rate is
10 per minute.
To Next Page
Loading...
