EMS EM250 Series - Mill Functions

Below is a list of keys that are specifically for the enhanced operation of the Lathe version of
the EM250 DRO.
Machine Specific Keys
Key Description
Used to set a Tool Offset compensation value
Enable internal axis summing (3-axes DRO only)
Toggle display between Radius and Diameter mode
Used to enable/disable Tool-offset mode
Mill Functions
Lathe Functions
Key Description
Bolt-hole (PCD) calculator function
Line-hole function
Inclined Machining function
Arc machining function
Arc machining step size
Simplified arc machining function
Setting of sub-datums or auxiliary co-ordinates to aid
multiple operations on a single workpiece (max 99)
- 39 -