To Next PageTo Next Page
Need help?Do you have a question about the EMS EM250 Series and is the answer not in the manual?
Important safety information, handling, and warranty guidelines.
Switches between absolute and relative positioning modes.
Sets the current axis position to zero.
Compensates for material shrinkage in machining.
Sets X-axis to display Diameter or Radius.
Compensates for tool length/diameter variations.
Sets DRO to display distance from desired position.
Defines multiple workpiece reference positions.
Calculates hole positions in a circular pattern.
Calculates positions for holes along a straight line.
Machines features on an inclined plane.
Machines a broad range of arcs with more parameters.
Important safety information, handling, and warranty guidelines.
Switches between absolute and relative positioning modes.
Sets the current axis position to zero.
Compensates for material shrinkage in machining.
Sets X-axis to display Diameter or Radius.
Compensates for tool length/diameter variations.
Sets DRO to display distance from desired position.
Defines multiple workpiece reference positions.
Calculates hole positions in a circular pattern.
Calculates positions for holes along a straight line.
Machines features on an inclined plane.
Machines a broad range of arcs with more parameters.
General| Display Type | LCD |
|---|---|
| Input Signal | TTL square wave |
| Resolution | 0.005mm / 0.0002" / 5µm |
| Operating Temperature | 0°C to 50°C |
| Input Voltage | 9-30V DC |
| Storage Temperature | -20°C to 70°C |
