EasyManua.ls Logo

EMS FIRECELL - Device Assignment Procedures; Assigning RCCs; Assigning Devices

EMS FIRECELL
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 9 of 10
Battery Information
FireCell Equipment Type
FireCell Control Panel/PSU
RCC
Callpoint
Detector
Combined Sounder &
Detector
Sounder / Sounder-Strobe
or Visual Indicator
Input/Output Unit
Typical Battery Life
Up to 5 years*
Up to 5 years*‡
Up to 5 years*
Up to 5 years*
Up to 5 years*
Up to 5 years*
Up to 5 years*
Batteries Required
As per system design
1x 6V 4Ah
6 x AA Alkaline cells
6 x AA Alkaline cells
3 x AA Alkaline cells
3 x C Alkaline cells
3 x AA Alkaline cells
3 x C Alkaline cells
6 x AA Alkaline cells
* Typical 5 year battery life, based on normal usage
See the Fire Control Panel / PSU Batteries section below for available batteries.
Note; if 72 hours battery standby is required, it is recommended that the battery is replaced
every 3 years
Part Number(s)
-
FC-006-004
FC-809-000
FC-809-000
FC-809-000
FC-810-000
FC-809-000
FC-810-000
FC-809-000
Battery Type / Quantity
12V 9Ah / 2 required
12V 12Ah / 2 required
12V 15Ah / 2 required
12V 17Ah / 2 required
12V 26Ah / 2 required
Part Number
FC-012-009
FC-012-012
FC-012-015
FC-012-017
FC-012-026
Fire Control Panel / PSU Batteries
Note: Fire Panel and associated PSU batteries used will vary according to system design.

Other manuals for EMS FIRECELL

Related product manuals