Need help?Do you have a question about the EMS SYSTEM 5000 and is the answer not in the manual?
General| Brand | EMS |
|---|---|
| Model | SYSTEM 5000 |
| Category | Fire Alarms |
| Language | English |
General handling precautions for the EMS System 5000 to prevent damage.
Details precautions to prevent damage from Electro-Static Discharge (ESD) to system components.
Guidelines on keeping products in packaging until installation to minimize damage risk.
Emphasizes using correct fixings suitable for the surface when installing system components.
Instructions for mounting the EMS System 5000 control panel unit.
Guidance on siting and surface mounting of Radio Callpoints.
Instructions for siting and affixing the back box of the Radio Sounder.
Procedure for siting Radio Detectors and disengaging the detector head from the mounting plate.
Describes the provision for two hardwired sounder circuits and monitoring resistors.
Explains the hardwired callpoint interface and its monitoring resistor.
Covers checking resistance of sounder and callpoint circuits before connection.
To Next Page
