To Next Page

To Previous Page

SYS5INST ISS.3 2000

5.5 Radio Detectors

5.5.1 Ensure that all Detectors are sited in accordance with the survey and design

details and that, wherever practical, the red LED faces the main entrance to the room.

5.5.2. If the Detectors are complete, remove the ceiling mounting plate by first

disengaging the detector head by turning it counter clockwise. This exposes the Radio

PCB (see figure 4). If only the mounting plate is being fitted at this time, refer to

section 5.5.4.

5.5.3. Disengage the ceiling mount by pressing down the locking pin (see figure 5)

and turning the radio module counter clockwise whilst pushing it against the ceiling

mount. The ceiling mount will now be available for fixing to the ceiling. Ensure that

the Detector head is suitably stored so as to prevent the possibility of accidental

damage.

Other manuals for EMS SYSTEM 5000

Questions and Answers:

Need help?

Do you have a question about the EMS SYSTEM 5000 and is the answer not in the manual?

General