EasyManua.ls Logo

EMS GREAT 512-DMX CONTROLLER - Maintenance and Technical Specifications; Cleaning and Maintenance; Technical Specifications

EMS GREAT 512-DMX CONTROLLER
16 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data load
[
Data import
]
1
Connect a USB memory device to the
controllers USB port.
The files to be imported must be stored in
the folder DMX Move Control 512located
on the root
directory of the USB memory
device.
2
Call the menu item with the
pan wheel
and
confirm with
ENTER
.
The display indicates Press number key
Select file (select file with number button).
The control LED of a number button lights,
when data is available on the USB memory
device for this
memory bank.
3
Select the file to be loaded with the
number
buttons 1-16
.
The display indicates a progress bar.
4
After successful completion of the data import,
the device returns to the main menu level.
Black-out mode
[
Blackout function
]
It is possible to define whether all control channels
react on the button BLACK OUT or only the
dimmer control
channel.
1
Call the menu item with the
pan wheel
and
confirm with
ENTER
.
2
Use the pan wheel to choose between the
settings [
All channels
] and [
Only dimmer
].
All channels
: All control channels react on
the button (i.e. in the blackout state the
control channels
have the value zero).
Only dimmer
: Only the dimmer control
channel reacts on the button BLACK OUT
(i.e. in the blackout state the control channel
has the value zero).
3
Confirm your setting with
ENTER
.
The display shortly indicates SAVE OK and
returns to the main menu level.
5.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.
6.
TECHNICAL SPECIFICATIONS
Power supply:
100-240 V AC, 50/60 Hz ~ via included power unit
Power consumption:
2.7 W
Number of control channels:
512
Storable scenes:
32
Storable chases:
32 with 100 steps each
Sound control:
via built-in microphone
DMX512/RDM output:
3-pin XLR connector
Available storage media:
USB devices (FAT32)
Dimensions (LxWxH):
Weight:
483 x 130 x 82 mm
Rack installation with 3 U
2.2 kg
Please note: Every information is subject to change without prior notice. 14.02.2014 ©