Reset to factory settings
03. Delete all
Fixture patch
Delete all DMX address
assignments
05. RDM DMX
Address setup
RDM DMX address
assignments
08. Send fixture
Update file
4.
SYSTEM SETTINGS
This mode allows you to change important system
settings for the controller.
Calling the System Settings
1.
Patch fixture
Fig. 8.1 Calling the system settings
1
Keep the button
MENU
for 2 seconds to call
the
system settings.
•
The display indicates the first menu item
“01.Patch fixture”.
2
Turn the
pan wheel
to browse the menu
items.
3
Press the button
ENTER
to select the
desired menu item.
4
Turn the
pan wheel
to change a setting and
confirm with
ENTER
.
5
Shortly press the button
ESC
to abort the
setting procedure and return to the main
menu
level.
6
To save your settings and exit the system
settings, keep the button
MENU
pressed for 2
seconds.
The following adjustments are possible:
Reset factory
[
Reset to factory
settings
]
Here you can reset the controller to factory
setting.
1
Call the menu item with the
pan wheel
and
confirm with
ENTER
.
2
Select the setting [
YES
] with the
pan wheel
and confirm with
ENTER
.
•
The display shortly indicates ”Reset factory
Please wait
..“
and then “OK“ as soon as
the factory settings are loaded.
Delete all Fixture patch
[
Delete all
DMX address assignments
]
All address assignments and control channel
options made can be deleted and reset to the
presettings.
1
Call the menu item with the
pan wheel
and
confirm with
ENTER
.
2
Select the setting [
YES
] with the
pan wheel
if a
reset is to be made. Confirm with
ENTER
.
•
The display shortly indicates “SAVE OK“ and
returns to the main menu level.
Fade mode
[
Fade function
]
The fade function can be assigned to all control
channels or only to the pan and tilt wheels.
1
Call the menu item with the
pan wheel
and
confirm with
ENTER
.
2
Use the
pan wheel
to select the setting [
ALL
CHANNELS
] if the fade function is possible
for all control channels or select [
ONLY
PAN/TILT
] if it is only possible for the pan
and tilt wheels. Confirm with
ENTER
.
•
The display shortly indicates “SAVE OK“ and
returns to the main menu level.
#1
This menu item is covered in chapter 6.
#2
This function is not available.
To Next Page
Loading...