the lower line and the current output value
as
a DMX value.
4
The 32 light effect units are combined in 2
groups (channel pages) of 16 channels each.
If necessary, use the button
PAGE
to switch
between the two channel groups 1-16 (LED
A lights) and 17-32 (LED B lights) and repeat
steps 2 and 3, until the desired values are
assigned to all channels.
Adjusting an Illumination Scene with
Movement Patterns and Color effects
The built-in effect generator allows creating 9
different movement patterns for pan and tilt
movement of moving heads or scanners as well
as 7 additional color effects for LED light effect
units. The effects can be saved together with
other DMX values in a scene.
1
Press the button
FIXTURE
(control LED
lights) and use the number buttons 1-16
to
select the devices to be assigned to
an
effect.
•
If necessary, used the button PAGE to
switch between the two channel groups 1-
6
(LED A lights) and 17-32 (LED B lights).
2
Call the effect mode with the button
MOVEMENT
.
•
The control LED lights.
3
Select the desired movement patterns or
color effect with the number
buttons 1-
16.
•
The selected devices will begin to
perform
the movement pattern or color
effect.
•
Number buttons 1-9
: Create movement
patterns designed for pan and tilt
movement
of moving heads or scanners.
•
Number buttons 10-16
: Create color
effects
for all kinds of LED light effect units.
•
For optimum results of the color effects
triggered by buttons 15 and 16, the
operation
with a least 8 devices is
recommended.
4
The parameters of the movement patterns
and color effects can be edited and
adapted
to your particular application.
MOVEMENT RANGE
PAN:050% TL:080%
Fig. 7.2 Adjusting parameters
•
Movement patterns 1-9
: Press the
button
SWAP
to switch between the
parameters
and adjust the values with
the
Pan/Tilt
wheels
.
-
MOVEMENT RANGE: The pan/tilt
movement
can be adjusted between 1 and
100 %.
-
MOVEMENT OFFSET: Correction values can
be adjusted for fine adjustment of the pan/tilt
movement.
-
MOVEMENT SPEED: The running speed can
be adjusted between 1 and 100 %.
-
DELAY LEVEL: The delay time for the
operation with several devices can be
adjusted between 0 and 30 seconds.
To Next Page
Loading...