EMS SBR-FX/RMD User Manual

SafetyBUS p Fiberoptic Router
SBR-FX/RMD
User Manual
EMS
THOMAS WÜNSCHE
Sonnenhang 3
D-85304 Ilmmünster
Tel +49-8441-490260
Fax +49-8441-81860
Documentation for SafetyBUS p Fiberoptic Router
SBR-FX/RMD
Document version: V1.5
Documentation date: April 17th, 2008
No part of this document or the software described herein
may be reproduced in any form without prior written
agreement from EMS Dr. Thomas Wünsche.
For technical assistance please contact:
EMS Dr. Thomas Wünsche
Sonnenhang 3
D-85304 Ilmmünster
Tel. +49-8441- 490260
Fax +49-8441- 81860
Email: support@ems-wuensche.com
Our products are continuously improved. Due to this fact
specifications may be changed at any time and without
announcement.
WARNING: SBR-FX/RMD hardware and software may
not be used in applications where damage
to life, health or private property may result
from failures in or caused by these compo-
nents.
User Manual SBR-FX/RMD
ii EMS Dr. Thomas Wünsche

EMS SBR-FX/RMD Specifications

General

Brand	EMS
Model	SBR-FX/RMD
Category	Network Router
Language	English

Summary

Overview

Attributes

Lists key features of the SafetyBUS p Fiber Optic Router.

General Description

Explains the router's function and transmission protocol.

Ordering Information

Provides product codes and specifications for ordering.

Hardware

LED Indicators

Explains the meaning of different LED states on the device.

Software

General Configuration

Details how to configure IP settings via RS232 terminal.

SafetyBUS p Startup Configuration

Describes modifying application start parameters like baudrate.

Electrical Characteristics

Absolute Limiting Values

Specifies critical temperature and voltage limits for the device.

Nominal Values

Lists typical current, voltage, and optical performance values.

Operating Instructions

Connection Scheme

Details CAN segment and terminal block connection pinouts.

Router Correction Time and Cascading

Explains correction times for different baudrates and cascading.

ESD Precaution

Advises on proper handling of the RS232 cable to prevent ESD.