EasyManua.ls Logo

EMSI Flex-IT - SD Modulation; Bi-Pulse Modulation

EMSI Flex-IT
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
MODE Interpretations
Modulated
Intensity and
Pulse Width
(SD)
so that the intensity is always increasing while the pulse width is decreasing and
equal to setting). Total cycle time is 6 seconds. Pulse rate (from 2 to 150Hz) and
pulse width (from 50 to 300µs) are fully adjustable.
Bi-Pulse
(Bi-Pulse)
rate of Channel 1 is fixed at 4Hz) while delivering 100 pulses per second to Chan-
nel 2 (i.e. the pulse rate of Channel 2 is fixed at 100Hz). Stimulation is burst on
Pulse width (from 50 to 300 µs) is fully adjustable.
9.0 | TENS Treatment Functions Descriptions continued

Related product manuals