18
3. Connect lead wires to unit:
Before proceeding to this step, be sure the unit is turned OFF.
Holding the insulated portion of the lead wire connector, insert the angled-“L” plug into the
receptacle on the top of the main unit. Please ensure the lead wires are inserted securely.
Control buttons on the front of the unit. You may choose to use one channel with one pair of lead
wires or both channels with two pairs of lead wires.
4. Place electrodes on skin:
Before applying electrodes, be sure that the skin surface over which electrodes are placed is thor
oughly cleaned and dried. Apply electrodes to the exact site indicated by your physician following
the instruction included with the electrodes labeling. Make sure that the electrodes are placed firmly
10.0 | Instructions For Use continued
Caution:
1. Always use 1.5” x 1.5” (16cm²) electrodes or larger.
(or comparable). Always use electrodes and leadwires that came with the unit. Using other
Caution: Always use leadwires that came with the unit. Using other leadwires may render
the unit non-operable and void the warranty.
To Next Page
Loading...
