14.0 | Troubleshooting
If your unit does not seem to operate correctly, refer to the chart below to determine possible causes.
function properly.
Low Battery
indicator flash.
2. Are electrodes in proper position and adhering to the skin?
See Section 10, Instructions for Use and the electrode
manufactures instruction for applying the electrodes.
3. Check lead wires. Be sure all connectors are firmly sealed.
See Section 10, Instructions for Use and the electrode
manufactures instruction for applying the electrodes.
4. Replace cord set with another to check for broken wires.
Recharge
battery pack
Recharge
battery pack
If none of these measures correct the problem, please contact a Customer Service Representative.
1. Check all control settings. Are they set to values prescribed
by your medical professional?
None of LCD
indicators
illuminate.
26
Manufacturer Keep Dry
Single patient use Do not put in regular trash
Caution: Read Instruction Manual
For Prescription use only
Descriptions
To Next Page
Loading...
