23
NOTE:
(a) If the treatment time is under one minute, it will not be recorded. For example, if your treatment time
is 10 minutes and 30 seconds, the patient compliance timer will record 10 minutes, not 11 minutes.
use the stimulator for over 999 minutes, it will record 999 minutes and the recorded time will flash
to indicate the treatment time is over 999 minutes.
2. Cumulative treatment time:
When initiating patient compliance timer, press “Mode” to shift the record of individual treatment
time with the number of sessions to the record of cumulative treatment time. When showing the
record of cumulative treatment time, there will be an “M” mark flashing on the screen.
Press and hold “Mode” & “Set” b
utton simultaneously for 3 seconds to delete all the records
including individual treatment time record and cumulative treatment time record.
users press and hold “Set” or “Mode” & “Set”, the records will be deleted.
To Next Page
Loading...
