21
Wired access:
- Connection:
Connect an Ethernet cable to the Ethernet port of your WiFi HDD.
Select “Wired access” in Internet access mode and “Save”. You are connected.
- Wired access settings (advanced mode):
Once you are connected with the “Wired access,” you can configure the network of the Wi-Fi HDD.
Network settings include DHCP and static IP. DHCP is automatically assigned IP by DHCP server on the
router (recommended). Static option may manually input the IP address, subnet mask, Router, DNS1,
DNS2 of the Wi-Fi HDD.
To Next Page
Loading...
Need help?
General
