ENA Micro 9 One Touch - Maintenance; Cleaning the milk system; Dismantling and rinsing the dual spout; Inserting and activating the filter

44
5 Maintenance
Unit for amount of water
You can change the unit for the amount of water
from ‘ml’ to ‘oz’.
Example: Change the unit for the amount of water
from
ML to OZ.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
DISPLAY is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the unit for the amount of water is set.
DISPLAY
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Language
In this programme item you can set the language
used by your ENA.
Example: Change the language from
ENGLISH
to
DEUTSCH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
LANGUAGE
is displayed.
k T Press the Rotary Switch to enter the
programme item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the language is set.
SPRACHE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
BEREIT
5 Maintenance
Your ENA has the following integrated mainte-
nance programmes:
U
Cappuccino frother cleaning (C-CLEAN)
U
Rinsing the machine (RINSE)
U
Cappuccino frother rinsing (C-RINSE)
U
Cleaning the machine (CLEAN)
U
Changing the filter (FILTER)
U
Descaling the machine (DE-SCALE)
E You can start the maintenance programmes
at any time in programming mode
(programme item
RINSE). If no action is
taken in this programme item, program-
ming mode is exited automatically after
approximately 5 seconds.
Rinsing the machine
You can initiate the rinse operation manually at
any time.
Precondition:
READY is displayed.
T Place a receptacle under the dual spout.
k T Press and hold the Rotary Switch until
RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
C-CLEAN
micro 9