ENA Micro 9 One Touch - Transport and environmentally friendly disposal

51
6 Display messages
pt
es
nl
it
fr
ru
en
de
6 Display messages
Message Cause/Result Action
FILL WATER
TANK
The water tank is empty or
not correctly inserted. You
cannot prepare any products.
T Fill the water tank (see Chapter 1 ‘Preparing and
using for the first time – Filling the water tank’).
T Insert the water tank.
EMPTY
GROUNDS
The coffee grounds container
is full. No speciality coffees
can be prepared, but hot
water preparation is possible.
T Empty the coffee grounds container and the
drip tray (see Chapter 3 ‘Daily operation – Daily
maintenance’).
TRAY
MISSING
The drip tray is not inserted
correctly or is not inserted at
all. You cannot prepare any
products.
T Insert the drip tray.
FILL BEANS
The bean container is empty.
No speciality coffees can be
prepared, but hot water
preparation is possible.
T Fill the bean container (see Chapter 1 ‘Preparing
and using for the first time – Filling the bean
container’).
CLOSE
COVER
The aroma preservation cover
for the bean container is not
fitted or not fitted correctly.
T Fit the aroma preservation cover correctly.
PRESS
RINSE
The ENA is prompting you to
perform a rinse or continue a
maintenance programme that
was already started.
T Press the Maintenance button to start the rinse
or to continue the maintenance programme.
CAPPUCCINO
RINSE
The ENA requests a cappuc-
cino rinse.
T Press the Maintenance button to start
cappuccino frother rinsing.
READY /
CLEAN
The ENA is prompting you to
clean it.
T Perform cleaning (see Chapter 5 ‘Maintenance –
Cleaning the machine’).
READY /
DE-SCALE
The ENA is prompting you to
descale it.
T Perform descaling (see Chapter 5 ‘Maintenance –
Descaling the machine ’).
READY /
FILTER
After 50 litres of water have
flowed through the CLARIS
Blue filter cartridge, it will
cease to work.
T Replace the CLARIS Blue filter cartridge (see
Chapter 5 ‘Maintenance – Changing the filter’).
NOT ENOUGH
POWDER
There is insufficient ground
coffee in the machine; the
ENA stops the operation.
T The next time you prepare a beverage, add
more ground coffee (see Chapter 2 ‘Preparation –
Ground coffee’).
TOO HOT
The system is too hot to start
a maintenance programme.
T Wait for several minutes until the system has
cooled or prepare a speciality coffee or hot water.