EasyManua.ls Logo

ENCAD NovaJet 4 - User Manual

Default Icon
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User's Guide
i
User's Guide
for
NovaJet 4, NovaJet
®
Pro-36, and NovaJet Pro-50
P/N 205883 Rev. C
(text P/N 206454)
Copyright ENCAD, Inc. 1995, 1996
N
OVAJET
®
and ENCAD
®
are registered trademarks of ENCAD, Inc.
HP-GL, HP-GL/2, and HP RTL are registered trademarks of Hewlett-Packard Company.
Macintosh is a registered trademark of Apple Computer Corp.
Other trademarks and registered trademarks are the property of their respective owners.
No part of this manual may be copied or distributed, transmitted, transcribed, stored in a
retrieval system, or translated in any human or computing language, in any form or by any
means, electronic, mechanical, magnetic or otherwise, or disclosed to a third party without the
express written permission of ENCAD, Inc., 6059 Cornerstone Court West, San Diego, CA
92121, U.S.A.
REVISION
HISTORY
Rev. A February, 1996
Rev. B March, 1996
Rev. C August, 1996

Table of Contents

Questions and Answers

  • J
    Joann JonesSep 3, 2025
    What to do if automatic cutter doesn’t work on ENCAD NovaJet 4 Printer?
    • K
      Kimberly ProctorSep 3, 2025
      If the automatic cutter on your ENCAD printer doesn’t work or tears the paper, make sure the Cut option in the Printer Setup menu is set to ON and that the cutter is properly installed.
  • C
    Charles BishopSep 18, 2025
    What does I/O error 20 mean on ENCAD Printer?
    • P
      Paige HerreraSep 18, 2025
      An I/O error 20 displays when running a self-test because no loopback connector is plugged into the printer’s serial port. This does not affect your printer’s operation.
  • M
    Margaret OliverSep 16, 2025
    How to improve line quality on ENCAD NovaJet 4?
    • J
      Jacob ClarkSep 16, 2025
      To improve poor vertical or horizontal line quality on your ENCAD printer, perform color calibration.
  • K
    Kenneth HollandSep 14, 2025
    What to do if ENCAD Printer settings are lost after reboot?
    • T
      Thomas GuerreroSep 14, 2025
      If your ENCAD printer settings are lost when the printer is turned off or rebooted, be sure to save your printer settings to a User number.
  • T
    twilliamsSep 12, 2025
    How to fix various nozzles that are clogged on ENCAD NovaJet 4?
    • D
      Dawn DavisSep 12, 2025
      If various nozzles are clogged or stop firing on your ENCAD printer, try the following steps: * Repeat prime several times. * Remove, clean, and reinstall the cartridge, then repeat prime. * Clean the service station, clean the cartridge again, and repeat prime. * Run prime. If sections of the print are still missing, replace the cartridge.
  • M
    Matthew GutierrezSep 12, 2025
    How to prevent cut sheet media from falling to the floor after print on ENCAD NovaJet 4 Printer?
    • D
      Douglas ElliottSep 12, 2025
      To prevent cut sheet media from falling to the floor after the print is completed on your ENCAD printer, set the Media option for the media standard you are using.
  • R
    Richard ValdezSep 9, 2025
    How to fix ENCAD Printer takeup roll that doesn't stop turning?
    • S
      Sarah JohnsonSep 9, 2025
      If the takeup roll on your ENCAD printer doesn't stop turning, check that the sensor is not blocked.
  • V
    Vicki ContrerasSep 7, 2025
    Why ENCAD NovaJet 4 takeup roll doesn't turn?
    • D
      diazshannonSep 7, 2025
      If the takeup roll on your ENCAD printer doesn't turn, make sure the power media feed unit is plugged in and turned on.
  • E
    Erica McclureSep 5, 2025
    What causes Carriage jams on ENCAD Printer and how to fix it?
    • N
      Nicole FisherSep 5, 2025
      If your ENCAD printer's carriage jams, check for paper jams or blockages. Also, make sure the service station is lowering.
  • A
    Andrew NormanAug 20, 2025
    How to fix ENCAD NovaJet 4 Printer that will not turn on?
    • J
      joshua08Aug 21, 2025
      If your ENCAD Printer is not turning on, ensure the power cord is securely attached to both the printer and a functioning power outlet. Also, verify that the power switch is in the ON position.

ENCAD NovaJet 4 Specifications

General IconGeneral
BrandENCAD
ModelNovaJet 4
CategoryPrinter
LanguageEnglish

Related product manuals