V
Vicki ContrerasSep 7, 2025
Why ENCAD NovaJet 4 takeup roll doesn't turn?
- DdiazshannonSep 7, 2025
If the takeup roll on your ENCAD printer doesn't turn, make sure the power media feed unit is plugged in and turned on.
Why ENCAD NovaJet 4 takeup roll doesn't turn?
If the takeup roll on your ENCAD printer doesn't turn, make sure the power media feed unit is plugged in and turned on.
How to fix ENCAD Printer takeup roll that doesn't stop turning?
If the takeup roll on your ENCAD printer doesn't stop turning, check that the sensor is not blocked.
How to prevent cut sheet media from falling to the floor after print on ENCAD NovaJet 4 Printer?
To prevent cut sheet media from falling to the floor after the print is completed on your ENCAD printer, set the Media option for the media standard you are using.
How to fix various nozzles that are clogged on ENCAD NovaJet 4?
If various nozzles are clogged or stop firing on your ENCAD printer, try the following steps: * Repeat prime several times. * Remove, clean, and reinstall the cartridge, then repeat prime. * Clean the service station, clean the cartridge again, and repeat prime. * Run prime. If sections of the print are still missing, replace the cartridge.