Enco Control - Remote Communication; Explanation of Abbreviations

ENCO Control
Technical description
•Kulautuvos g. 45a , LT-47190 Kaunas •Tel. (+370 37) 360234 •Faks. (+370 37) 360358 •info@axis.lt • www.axis.lt
5
Remote communication
The device can communicate via Ethernet, GSM / GPRS. It supports protocols TCP / IP, UDP,
DHCP.
There is possibility to setup parameters, download archive files, and update the firmware
remotely.
The selected system messages are sent to the user remotely:
- Power supply Off / On;
- Changing of firmware (updating);
- Changing of the state of the logic inputs (high / low level);
Read archived data;
Change settings of HVAC and meter reading.
Explanation of Abbreviations
PSU
Power supply unit
MCU
Microprocessor
LCD
Liquid Crystal Display
SIM
Subscriber identification module (card)
RFID
Radio frequency identification
CN1
USB port
RTC
Real-time clock
DC
Direct current
AC
Alternating current
HVAC
Heating, ventilation and air conditioning systems
Environmental conditions
Ambient temperature
5°C ÷ 55°C
Relative humidity
Up to 93%
Degree of protection of housing to IEC 60529
IP30 (The device is designed for
installation in a cabinet, corresponding to
the class IP65)
Overall dimensions
202 mm x 126 mm x 100 mm
Power supply
Power supply for 9 NO semiconductor relays
230 V, 50 Hz, ~ 1,2 A for each of 9 relays,
~ 4 A total
Mains supply for internal PSU
230 V, 50 Hz, ~100 mA max;
Backup battery
12 V, 800 mA max., 1,2 - 2.2 Ah
Internal Lithium battery for real time clock (RTC)
3 V
Inputs / outputs for connecting remote devices