Endless Summer 153100

Questions and Answers

J
Jeremy JacobsonAug 17, 2025
Why won't the pilot light on my Endless Summer Patio Heater?
- C
  Chelsea JamesAug 17, 2025
  Several factors can prevent the pilot light from igniting on your Endless Summer Patio Heater. It could be due to a closed tank valve (open the valve to resolve this), a blockage in the orifice or pilot tube (clean or replace these parts), air in the gas line (bleed the gas line by pressing the control knob for 1-2 minutes until you smell gas), low gas pressure (replace the tank), or a faulty igniter (use a match to light the pilot and replace the igniter).
J
James McgeeAug 20, 2025
What to do if my Endless Summer 153100 burner won’t light?
- M
  Mark HaynesAug 20, 2025
  If the burner on your Endless Summer Patio Heater fails to light, the issue might stem from low gas pressure (turn the tank valve OFF and replace the tank). Alternatively, there could be a blockage in the orifice (clear the blockage), or the control knob might not be in the ON position (turn the control knob to ON).
Q
qcantuAug 22, 2025
What to do if pilot won’t stay lit on Endless Summer 153100?
- L
  logan66Aug 22, 2025
  If the pilot light on your Endless Summer Patio Heater won't stay lit, it could be due to dirt buildup around the pilot (clean the dirt). Another cause might be a loose connection between the gas valve and pilot assembly (tighten the connection and perform a leak check). Lastly, the thermocouple might not be operating correctly (replace the thermocouple).
D
David PetersAug 26, 2025
How to fix Endless Summer 153100 Patio Heater pilot that won’t light?
- A
  ashleyandrewAug 26, 2025
  If the pilot light on your Endless Summer Patio Heater won't light, several factors could be at play. First, ensure that the cylinder valve is open. If it is, there might be a blockage in the orifice or pilot tube, requiring cleaning or replacement. Another possibility is air in the gas line; in this case, open the gas line and bleed it by pressing the control knob for up to two minutes, or until you smell gas. Low gas pressure can also be the culprit, so turn the cylinder valve off and replace the cylinder. Lastly, if the igniter is faulty, try lighting the pilot with a match and replace the igniter.
J
johngardnerAug 28, 2025
What to do if the pilot won’t stay lit on Endless Summer 153100?
- K
  Kaitlin DominguezAug 28, 2025
  If the pilot light on your Endless Summer Patio Heater won't stay lit, it might be due to dirt accumulation around the pilot; clean the area around the pilot. Check the connection between the gas valve and pilot assembly; if it's loose, tighten it and perform a leak check. A faulty thermocouple can also cause this issue, so consider replacing it.
D
Dean AtkinsonAug 31, 2025
Why won't the burner light on my Endless Summer 153100 Patio Heater?
- M
  Mallory FrenchAug 31, 2025
  If the burner on your Endless Summer Patio Heater won't light, check if the gas pressure is low. If so, turn the cylinder valve off and replace the cylinder. Also, inspect the orifice for any blockages and clear them. Finally, ensure that the control knob is in the ON position.
D
David WoodsSep 2, 2025
Why is the burner flame low on my Endless Summer 153100?
- E
  Eddie GarrettSep 3, 2025
  A low burner flame on your Endless Summer Patio Heater can be attributed to several reasons: low gas pressure (turn the tank valve OFF and replace the tank), outdoor temperature being below 40ºF with a tank less than 1/4 full (use a full tank), a bent or kinked supply hose (straighten the hose), or a blockage in the burner and orifices (check for and clear any blockages).
M
Michael MartinezSep 5, 2025
Why does my Endless Summer Patio Heater emitter glow unevenly?
- V
  Vincent WarrenSep 5, 2025
  Uneven glowing of the emitter on your Endless Summer Patio Heater can occur due to low gas pressure (turn the tank valve OFF and replace the tank). It may also happen if the base is not on a level surface (place the heater on a level surface), or the burner needs cleaning (clean the burner).
M
Mrs. Nicole GonzalezSep 8, 2025
What to do if Endless Summer 153100 produces thick black smoke?
- T
  Tammy MillerSep 8, 2025
  If your Endless Summer Patio Heater is emitting thick black smoke, there is likely a blockage in the burner. Remove the blockage and clean the burner inside and outside.
K
Kelly LambertSep 12, 2025
How to fix uneven glowing emitter on Endless Summer 153100?
- S
  Scott TerrySep 12, 2025
  If the emitter on your Endless Summer Patio Heater glows unevenly, it could be due to low gas pressure; turn the cylinder valve off and replace the cylinder. Ensure the base is on a level surface. If the heater is level, the burner may need cleaning.

Summary

Assembly Instructions

General Components & Features

Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 20 for specifications.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater.

Operation

Before Turning Gas Supply ON

Your heater was designed and approved for OUTDOOR USE ONLY. DO NOT use it inside a building, garage, or any other enclosed area.

Before Lighting

Heater should be thoroughly inspected before each use, and by a qualified service person at least annually.

Lighting

This heater is equipped with a Pilot Light that allows for safer startups and shutdowns. Pilot must be lit before Main Burner can be started.

Re-lighting

For your safety, Control Knob cannot be turned OFF without first depressing Control Knob in PILOT position and then rotating it to OFF.

Shut Down

Turn Control Knob clockwise to Pilot. (Normally, burner will make a slight popping sound when extinguished.)

Operation Checklist

For a safe and pleasurable heating experience, perform this check before each use.

Troubleshooting

Maintenance

Storage

Service

Limited Warranty

Specifications