Endress+Hauser Liquipoint FTW 31 - Page 4

Liquipoint T FTW 31, FTW 32
4 Endress + Hauser
Probes without integrated electronic insert (separate-instrument version) for one or two
point detection respectively
The measuring system consists of:
• FTW 31, FTW 32 with two/three rods or ropes
• Nivotester FTW 325 or FTW 470 Z
• Control units, switches or signal transmitters, e.g. process control systems PLC, relays, etc.
L00-FTW3xxxx-14-05-xx-en-002
Switch points dependent on the tank material
Probes without integrated electronic insert for multiple point detection
The measuring system consists of:
• FTW 31, FTW 32 with five rods or ropes
• Two Nivotester FTW 325 or FTW 470 Z
• Control units, switches or signal transmitters, e.g. process control systems PLC, relays, etc.
L00-FTW3xxxx-14-05-xx-en-003
Switch points dependent on the tank material
FTW470Z
1
1
2
2
FTW470Z
1
1
2
2
FTW 325
FTW 325
FTW 31/32
FTW 31/32
FTW 325
FTW470Z
1
1
2
2
FTW 325 or FTW 470 Z
FTW 325 or FTW 470 Z
1 - 2 points
2 - 3 rods/ropes
3 points
3 rods/ropes
FTW470Z
1
1
2
2
FTW470Z
1
1
2
2
FTW470Z
1
1
2
2
FTW470Z
1
1
2
2
FTW 325FTW 325
FTW 325FTW 325
FTW 31/32
FTW 31/32
FTW 325
FTW470Z
1
1
2
2
4 points
5 rods/ropes
5 points
5 rods/ropes
FTW 325 or FTW 470 Z
FTW 325 or FTW 470 Z