Need help?Do you have a question about the Endress+Hauser Liquiphant and is the answer not in the manual?
General| Process Temperature | -50 to +150 °C (-58 to +302 °F) |
|---|---|
| Process Pressure | Up to 100 bar (1450 psi) |
| Output | Relay, NAMUR, PNP, 4…20mA |
| Approvals | ATEX, IECEx, FM, CSA |
| Housing Material | Aluminum |
| Connection | Threaded, flanged, or hygienic clamp |
| Protection Class | IP66 |
| Electrical Connection | Cable gland |
| Power Supply | 24 V DC, 230 V AC, or others depending on model |
Step-by-step guide for securely mounting the device using G 1 1/2 A connections.
Instructions for mounting the device using NPT thread connections.
Procedure for adjusting the switchpoint, requiring the tank to be depressurized.
To Next Page