Need help?Do you have a question about the Endress+Hauser Liquiphant FTL31 and is the answer not in the manual?
General| Measuring Principle | Vibrating Fork |
|---|---|
| Application | Level detection in liquids |
| Device Type | Level Switch |
| Wetted Materials | 316L, PTFE, PEEK |
| Output | PNP, NPN, Relay |
| Power Supply | 24 V DC |
| Housing Material | Aluminum |
| Protection Rating | IP66/IP67 |
| Approvals | ATEX, IECEx |
| Connection | G 1 |
| Medium Density | 0.7 g/cm3 |
Outlines qualifications and authorizations for personnel.
Defines the device's purpose, media compatibility, and consequences of misuse.
Details safety measures for working with the device.
Emphasizes safe operation and operator responsibility.
Confirms design, testing, and compliance with safety standards.
General conditions, orientation, switch points, and viscosity impact on mounting.
Checklist for verifying correct installation and device security.
Details on connecting 3-wire DC-PNP devices in MAX/MIN modes.
Terminal assignments and LED indications for Maximum and Minimum safety operating modes.
Details on 2-wire AC/DC connection and relay selection.
Checklist for verifying correct electrical connections and cable integrity.
Lists checklists to perform before commissioning the device.
Tables listing malfunctions, causes, and corrective actions based on LED indicators.
To Next Page
