Repair Liquiphant FTL31
34 Endress+Hauser
10 Repair
Repair is not envisaged for the point level switch.
10.1 Spare parts
The website for the W@M Device Viewer (www.endress.com/deviceviewer): All spare parts
for the measuring device are listed here together with the order code and can be ordered here.
If available, users can also download the associated Installation Instructions.
10.2 Return
The requirements for safe device return can vary depending on the device type and national
legislation.
1. Refer to the website for more information:
http://www.endress.com/support/return-material
2. Return the device if repairs or a factory calibration are required, or if the wrong device
was ordered or delivered.
10.3 Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), our products are marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Such products may not be disposed of as
unsorted municipal waste and can be returned to Endress+Hauser for disposal at conditions
stipulated in our General Terms and Conditions or as individually agreed.
11 Accessories
For detailed information on accessories, see the Technical Documentation TI01147F.
Designation Additional information
Weld-in adapter
For detailed information on the weld-in adapters, see
TI00426F/00/EN and the supplementary documentation → 5.
Seals, O-rings
To Next Page
Loading...
