Need help?Do you have a question about the Endress+Hauser Liquiphant M FTL51C and is the answer not in the manual?
General| Measuring Principle | Vibration |
|---|---|
| Type | FTL51C |
| Application | Liquids |
| Process Connection | Thread, Flange, Hygienic connections |
| Process Temperature | -40°C to +100°C |
| Process Pressure | Up to 40 bar |
| Wetted Parts Material | 316L |
| Output Signal | Relay |
| Housing Material | Aluminum |
| Power Supply | 24 V DC |
| Protection Rating | IP66 |
| Approvals | ATEX, IECEx |
| Communication | HART |
| Material | 316L stainless steel |
General safety instructions for the device and its operation.
Guidelines for safely holding and manipulating the device.
Information on identifying the device and its components.
Description of the device's point level detection application in fluids.
Details on direct connection, switching unit, and PROFIBUS PA systems.
Guidance on switchpoint adjustment and mounting based on viscosity.
Procedures for setting up the device, including safety modes and density.
Understanding LED indicators and electrical connection procedures.
Functions, outputs, and connections for FEL51 to FEL58 models.
Specifics on the FEL50A model for PROFIBUS PA communication.
Procedures for device maintenance, repair, and cleaning.
Common faults, their causes, and recommended remedies.
Information on replacement parts and supplementary technical documents.
To Next Page
