Need help?Do you have a question about the Endress+Hauser Levelflex M FMP40 and is the answer not in the manual?
General| Communication | HART, PROFIBUS PA, FOUNDATION Fieldbus |
|---|---|
| Type | Level sensor |
| Device Type | FMP40 |
| Application | Level measurement |
| Measuring Principle | TDR (Time Domain Reflectometry) |
| Measuring Range | Up to 30 m |
| Process Temperature | -40 to +150 °C (-40 to +302 °F) (depending on probe and process connection) |
| Process Pressure | -1 to 40 bar (-14.5 to 580 psi) |
| Accuracy | ± 2 mm |
| Output Signal | 4-20 mA, HART |
| Power Supply | 10-30 V DC |
| Material | Stainless steel, PTFE |
| Housing Material | Aluminum |
| Protection Class | IP68 |
| Approvals | ATEX, IECEx |
| Probe Type | Rod, cable |
Covers safety requirements for installing, commissioning, and operating the device.
Highlights alternative monitoring measures for operational and process safety.
Provides a step-by-step guide for quick installation of the device.
Details the procedures for installing the device, including probe handling.
Lists checks to perform after the device has been installed.
Provides a concise guide for wiring the device.
Covers the essential steps for connecting the measuring unit.
Lists checks to perform after wiring and connecting the device.
Offers a quick overview of the device's operating options.
Explains how to operate the device using the VU331 display module.
Covers operation using Endress+Hauser software like FieldCare.
Explains operation using FOUNDATION Fieldbus configuration tools.
Describes operation using the Field Communicator handheld terminal.
Ensures all final checks are completed before device startup.
Details methods to unlock the device for parameter changes.
Guides through the essential basic setup of the device.
Details the commissioning process using the VU331 display.
Covers basic setup using Endress+Hauser operating software.
Explains commissioning using FOUNDATION Fieldbus tools.
Details commissioning via handheld terminal.
Outlines the Endress+Hauser repair concept and procedures.
Provides instructions and flowcharts for troubleshooting issues.
Lists system error codes, their possible causes, and remedies.
Provides a checklist for the commissioning process.
To Next Page
