Commissioning Levelflex M FMP40 FOUNDATION Fieldbus
72 Endress+Hauser
6.8 Basic setup with the Endress+Hauser operating
program
To carry out the basic setup with the operating program, proceed as follows:
• Start the operating program and establish a connection.
• Select the "basic setup" function group in the navigation window.
The following display appears on the screen:
Basic setup step 1/6:
•Status image
• The TAG number can be entered.
L00-FMP4xxxx-20-00-00-en-001
!
Note!
• Each parameter that is changed must be confirmed with the RETURN key!
•The "Next" button takes you to the next screen:
To Next Page
Loading...
