Endress+Hauser Levelflex M FMP40 Brief Operating Instructions

KA01040F/00/EN/13.10
71120279
Brief Operating Instructions
Levelflex M FMP40
Guided Level-Radar
These are Brief Operating Instructions.
For more detailed information, please refer to the Operating Instructions and the
additional documentation on the CD-ROM provided.
These Brief Operating Instructions are not intended to replace the Operating
Instructions provided in the scope of supply.
The complete device documentation consists of:
• these Brief Operating Instructions
• Approvals and safety certificates
• a CD-ROM with:
– the Operating Instructions
– Technical Information

Endress+Hauser Levelflex M FMP40 Specifications

General

Communication	HART, PROFIBUS PA, FOUNDATION Fieldbus
Type	Level sensor
Device Type	FMP40
Application	Level measurement
Measuring Principle	TDR (Time Domain Reflectometry)
Measuring Range	Up to 30 m
Process Temperature	-40 to +150 °C (-40 to +302 °F) (depending on probe and process connection)
Process Pressure	-1 to 40 bar (-14.5 to 580 psi)
Accuracy	± 2 mm
Output Signal	4-20 mA, HART
Power Supply	10-30 V DC
Material	Stainless steel, PTFE
Housing Material	Aluminum
Protection Class	IP68
Approvals	ATEX, IECEx
Probe Type	Rod, cable