Endress+Hauser Levelflex M FMP40 - Envelope Curve with Device Display

Commissioning Levelflex M FMP40 FOUNDATION Fieldbus
42 Endress+Hauser
L00-FMP4xxxx-14-00-06-xx-001
5.6 Envelope curve with device display
After the basic setup, an evaluation of the measurement with the aid of the envelope curve
"envelope curve" (0E) function group) is recommended.
5.6.1 Function "plot settings" (0E1)
Here you can select which information is shown on the display:
• just the envelope curve
• The envelope curve and the echo evaluation line FAC
• The envelope curve and interference echo suppression (map)
!
Note!
The interference echo suppression (map) are explained in BA00245F/00/EN "Description of
Instrument Functions".
⇒
UB
H
50
ENDRESS + HAUSER
E
+
–