Need help?Do you have a question about the Endress+Hauser Levelflex M FMP40 and is the answer not in the manual?
General| Communication | HART, PROFIBUS PA, FOUNDATION Fieldbus |
|---|---|
| Type | Level sensor |
| Device Type | FMP40 |
| Application | Level measurement |
| Measuring Principle | TDR (Time Domain Reflectometry) |
| Measuring Range | Up to 30 m |
| Process Temperature | -40 to +150 °C (-40 to +302 °F) (depending on probe and process connection) |
| Process Pressure | -1 to 40 bar (-14.5 to 580 psi) |
| Accuracy | ± 2 mm |
| Output Signal | 4-20 mA, HART |
| Power Supply | 10-30 V DC |
| Material | Stainless steel, PTFE |
| Housing Material | Aluminum |
| Protection Class | IP68 |
| Approvals | ATEX, IECEx |
| Probe Type | Rod, cable |
To Next Page
