Accessories Levelflex M FMP40 FOUNDATION Fieldbus
88 Endress+Hauser
8.8 Extension rod / Centering
L00-FMP4xxxx-17-00-00-en-025
010 Approval
A For non-hazardous areas
M FM DIP Cl. II DIv.1 Gr. E - G N.I., zone 21, 22
P CSA DIP Cl. II Div.1 Gr. G + Coal dust, N.I.
S FM Cl. I, II, III DIv.1 Gr. A - G N.I., zone 0, 1, 2, 20, 21, 22
U CSA Cl. I, II, III Div.1 Gr. A - G N.I., zone 0, 1, 2
1ATEX II 1G
2ATEX II 1D
020 Extension rod; Nozzle Height
1 115mm; 150 - 250mm / 6 - 10"
2 215mm; 250 - 350mm / 10 - 14"
3 315mm; 350 - 450mm / 14 - 18"
4 415mm; 450 - 550mm / 14 - 22"
9 Special version, TSP-No. to be spec.
030 Center Washer
A Not selected
B DN40 / 1-1/2", inside-d. = 40 - 45mm, PPS
C DN50 / 2", inside-d. = 50 - 57mm, PPS
D DN80 / 3", inside-d. = 80 - 85mm, PPS
E DN80 / 3", inside-d. = 76 - 78mm, PPS
G DN100 / 4", inside-d. = 100 - 110mm, PPS
H DN150 / 6", inside-d.= 152 - 164mm, PPS
J DN200 / 8", inside-d.= 210 - 215mm, PPS
K DN250 / 10", inside-d.= 253 - 269mm, PPS
Y Special version, TSP-No. to be spec.
HMP40- Complete product designation
#
DN50 (2")
DN80 (3")
DN150 (6")
DN200 (8")
DN250 (10")
centering disk
at PPS - GF40
For DN200 and DN250
in combination
with horn adapter
Extension rod
Not for ¾" probe.
For rod probe on request.
nozzle
height
Keep metal tube
at minimum length!
To Next Page
Loading...
