Levelflex M FMP40 FOUNDATION Fieldbus Operation
Endress+Hauser 45
5.3 Operation with an Endress+Hauser operating program
The operating program FieldCare is an Endress+Hauser Plant Asset Management Tool based on
FDT technology. You can use Field-Care to configure all your Endress+Hauser devices, as well as
devices from other manufacturers that support the FDT standard. Hardware and software
requirements you can find on the internet:
www.endress.com È select your country È search: FieldCare È FieldCare È Technical Data.
FieldCare supports the following functions:
•Online configuration of transmitters
•Signal analysis via envelope curve
•Tank linearization
•Loading and saving of device data (upload/download)
•Documentation of the measuring point
Connection options:
• Commubox FXA291 with ToF Adapter FXA291 via service interface
Menu-guided commissioning
L00-FMP4xxxx-20-00-00-en-001
To Next Page
Loading...
