Operation Levelflex M FMP40 FOUNDATION Fieldbus
48 Endress+Hauser
Source of supply
5.4.3 Representation of parameters
A FOUNDATION Fieldbus configuration tool offers two types of parameter representation:
•Representation by parameter name
Examples: "PAROPERATIONCODE", "PARRESET"
•Representation by parameter label
(identical to the labels on the display module VU331 and in an Endress+Hauser operation tool)
Examples: "unlock parameter", "reset"
5.5 Operation with the handheld terminal
Field Communicator 375, 475
5.5.1 Connection
The handheld terminal is directly connected to the FOUNDATION Fieldbus communication line.
An additonal communication resistor is not required.
5.5.2 Device Descriptions
Make sure you have loaded the valid device Description files (DDs). DDs can be downloaded from
the internet at "www.fieldcommunicator.com". The DDs can also be updated by the update
functionality of the Field Communicator 375, 475.
5.5.3 User interface
The device parameters are arranged in blocks.
The handheld terminal Field Communicator 375, 475 uses this block structure to access the
parameters. You can navigate within the structure by the arrow keys and the "Enter" key.
Alternatively, you can use the touch-screen functionality of the handheld terminal for navigation.
(Double-click on a name opens the respective block or parameter).
Host System Source of supply for the device Description and Network Configuration files
ABB (Field Controller 800)
Allen Bradley (Control Logix)
Endress+Hauser (ControlCare)
Honeywell (Experion PKS)
Invensys
SMAR (System 302)
• www.endress.de (
È Download È Media type = "Software", "Instrument Drivers")
• CD-ROM (Endress+Hauser order code: 56003896)
• www.fieldbus.org
Emerson (Delta V) • www.easydeltav.com
Yokogawa (CENTUM CS
3000)
• www.yokogawa.com
To Next Page
Loading...
