Endress+Hauser Levelflex M FMP40 - The operating menu

Levelflex M FMP40 FOUNDATION Fieldbus Operation
Endress+Hauser 43
5.2.5 The operating menu
General structure of the operating menu
The operating menu is made up of two levels:
• Function groups (00, 01, 03, ..., 0C, 0D): The individual operating options of the device are
split up roughly into different function groups. The function groups that are available include, e.g.:
"basic setup", "safety settings.", "output", "display", etc.
• Functions (001, 002, 003, ..., 0D8, 0D9): Each function group consists of one or more
functions. The functions perform the actual operation or parameterisation of the device.
Numerical values can be entered here and parameters can be selected and saved. The available
functions of the "basic setup" (00) function group include, e.g.: "tank shape" (002),
"medium property" (003), "process cond." (004), "empty calibr." (005), etc.
If, for example, the application of the device is to be changed, carry out the following procedure:
1. Select the "basic setup" (00) function group.
2. Select the "tank shape" (002) function (where the existing tank shape is selected).
Function codes
For easy orientation within the function menus, for each function a position is shown on the display.
L00-FMRxxxxx-07-00-00-de-005
The first two digits identify the function group:
The third digit numbers the individual functions within the function group:
Hereafter the position is always given in brackets (e.g. "tank properties" (002)) after the described
function.
•basic setup 00
•safety settings 01
•linearisation 04
. . .
•basic setup 00 → •tank properties 002
•medium property 003
•process cond. 004
. . .