Endress+Hauser Liquistation CSF33 - Page 22

Electrical connection Liquistation CSF33
22 Endress+Hauser
2.
1.
3.
A0012831
1. Release the screw with an Allen key (5 mm).
2. Remove the cover of the power unit from the front.
3. When reassembling make sure that the seals are seated correctly.
5.1.6 Power supply terminal assignment
The power supply is connected via plug-in terminals.
‣
Connect the ground to one of the ground connections.
Batteries and fuses are available as an optional extra.
Use rechargeable batteries only.