Endress+Hauser Liquistation CSF33 - Page 35

Liquistation CSF33 Operation options
Endress+Hauser 35
6.3.3 Numerical values
• You are changing a variable.
• The maximum and minimum values for this variable are shown on the display.
• Configure a value within these limits.
• Example: Menu/Operation/Display/Contrast
6.3.4 Actions
• You trigger an action with the appropriate function.
• You know that the item in question is an action if it is preceded by the following symbol:
• Examples of typical actions include:
• Deleting log entries
• Saving or loading configurations
• Triggering cleaning programs
• Examples of typical actions include:
• Start a sampling program
• Start manual sampling
• Saving or loading configurations
• Example: Menu/Manual sampling/Start sampling