Micropilot FMR60, FMR62, FMR67 XA01555F-A
Endress+Hauser 17
Structure of the extended order code
FMR6x – ************* + A*B*C*D*E*F*G*..
(Device type) (Basic specifications) (Optional specifications)
* = Placeholder
At this position, an option (number or letter) selected from the specification is displayed
instead of the placeholders.
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features).
The number of positions depends on the number of features available. The features have a 2-digit
structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists
of a number or a letter (e.g. J = Test, Certificate). The second digit constitutes the value that stands
for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate).
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous
locations.
Extended order code: Micropilot
Device type
FMR60, FMR62, FMR67
Basic specifications
Position 1, 2 (Approval)
Selected option Description
FMR6x B2 ATEX II 1/2 G Ex ia IIC T6 Ga/Gb
ATEX II 1/2 D Ex ia IIIC T85°C Da/Db
I2 IECEx Ex ia IIC T6 Ga/Gb
IECEx Ex ia IIIC T85°C Da/Db
Position 3 (Power Supply, Output)
Selected option Description
FMR6x A 2-wire, 4-20 mA HART
B 2-wire, 4-20 mA HART, switch output (PFS)
C 2-wire, 4-20 mA HART, 4…20 mA
To Next Page
Loading...
