Fasten the cables with cable ties
and put back the cover.
9
Power the device with the included
DIN or USB adapter. Place the
measuring unit accessible, but in a
weather-protected space e.g. indoors
or in a facade cabinet. Attach the
device with the included Velcro strap.
10
1
Check that the device is in
conguration mode:
If not, press the bottom button for
~10 seconds until it starts flashing
blue.
Open the enegic app and log in with
your installer account. Then enter the
customer's account name in the
“Impersonate” eld and log in again.
2
3
Go to Settings, New device and
Congure new physical device.
Congure the device according to the
instructions in the app. Once the
device is congured, it will appear in
“Overview”.
4
Conguration2
support@enegic.com
v 1.0
enegic.com
+46 836 77 23
To Next Page
Loading...