What to do if my Enerdrive ePOWER Inverter has no AC output and the ‘Power’ indicator is off?
If your Enerdrive Inverter has no AC output and the ‘Power’ indicator is off, first ensure the unit is turned on using the green power button. If it remains off, check the fuse or disconnect switch (if installed) to see if they are blown or turned off, as this could be preventing power from reaching the inverter.
Covers critical safety information including fire, shock, and explosion hazards for proper inverter use.
Specifies restrictions on inverter usage, including medical equipment and user capabilities.
Overview of the inverter's external components, indicators, and ports.
Details on necessary materials and wiring considerations before installing the inverter.
Instructions for correctly connecting the DC power input to the inverter.
Procedure to verify the inverter is installed and functioning correctly.
Instructions on turning the unit ON/OFF and using the Power Save function.
Explanation of the various 'Status' indicator lights and their meanings.
Details on automatic fan activation and using the Ignition Start function.
Descriptions of warnings and automatic shutdowns due to voltage, temperature, or overload.
Information on the USB output port and connecting an optional remote switch.
Guidance on connecting AC loads and potential appliance compatibility issues.
Details of the standard limited warranty for the Enerdrive ePOWER Inverter.
Information on the additional pro-rata support program offered by Enerdrive.
Procedures for returning, repairing, or replacing the inverter within the warranty period.
Exclusions and conditions not covered by the Enerdrive product warranty.
General| Continuous Power | 2000W |
|---|---|
| Surge Power | 4000W |
| Input Voltage | 12V DC |
| Output Voltage | 230V AC |
| Output Waveform | Pure Sine Wave |
| Frequency | 50Hz |
| Protection | Overload, Over Temperature, Short Circuit |
| Cooling | Temperature Controlled Fan |
To Next Page
