25
This certificate should be kept in a safe place. The client may be required to present it
in the event of a warranty claim.
• Once the installation is complete and the system tested, the installer shall
ensure that the client understands the operational and safety requirements of
the heat pump.
• All repair- and service work must only be performed by a person authorised by
the manufacturer. Failure to comply with this will void the warranty.
• Ensure that the details of the certificate below are comprehensively completed by
both the client and the installer to ensure the warranty on the heat pump is instated.
Heat Pump Serial Number:
Installation date:
INSTALLER DETAILS
Company Name: Reference Number:
Surname: Name:
Signature:
Tel:
CLIENT DETAILS
Surname: Name:
Address:
Suburb:
City:
Tel:
I (the undersigned) acknowledge that the installation was completed and tested as fully
functioning. I confirm that the installer has shown me the workings and operation of my Enerflow
heat pump. I also understand the operation and safety requirements for this heat pump unit.
Signature:
Installation Handover Certificate
Residential Heat Pumps
To Next Page
Loading...