WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL
OUTLET BEFORE CLEANING, LUBRICATING OR SERVICING THE UNIT.
CLEANING
General cleaning of the treadmill will prolong its life and improve performance. Keep the unit
clean by dusting regularly. Be sure to dust the exposed part of the deck on either side of the
walking belt and also the side rails. For best performance, we recommend your treadmill be
placed on a treadmill mat. Along with reducing noise, a treadmill mat will help keep dust
debris away from your treadmill's critical components. Clean the belt’s top with a wet, soapy
cloth. Be careful to keep liquid away from inside the motorized treadmill frame or underneath
the belt.
WARNING:
ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET
BEFORE REMOVING THE MOTOR COVER.
At least once a year remove the motor cover and vacuum under the motor cover with
caution.
Walking Belt and Deck Lubrication
It’s important to take good care of your
treadmill deck (the walking surface
underneath the belt), because the belt/deck
friction may affect the function and life of
your treadmill and requires periodic
lubrication.
Provided with the treadmill is a small sample bottle of lubrication oil. Just lift the belt and
spread from the centre of the deck to the edge where the belt touches the deck, do this to
both sides of the treadmill. If you run or jog your stride widens, so spread to the front of the
deck to reduce friction in this area. Use the following timetable as a guide to lubricate the
deck.
Note: In tropical areas you may have to lubricate more often due to humidity.
To Next Page
Loading...
Need help?
General
