ENERGY KINETICS SYSTEM 2000 Ascent Combi - Installer Notes and System Scope

Ascent Oil – August 2019 6
RECORD OF INSTALLATION
INSTALLER NAME:
INSTALLER ADDRESS:
INSTALLER CITY, STATE:
DATE INSTALLED:
NOTES:
SCOPE
This manual covers the Energy Kinetics Ascent Combi Boiler. The boiler is designed and equipped and has been
tested to generate hot water in a low pressure closed loop system. The boiler is a major component of a closed loop
system that can be used as a heat source for hydronic, radiant, domestic hot water, spa, and/or pool heating systems. Call
Energy Kinetics to obtain piping and wiring instructions for applications, such as hydronic heating, radiant heating, domestic
hot water, swimming pool heating, multiple boilers, primary/secondary injection loops, etc. The installer of the system is
responsible for the final design of the system and for adding the balance of the needed parts to complete the system.
COMMONWEALTH OF MASSACHUSETTS
When the boiler is installed within the Commonwealth of Massachusetts:
 This product must be installed by a licensed plumber
 If antifreeze is used, a reduced pressure backflow preventer device shall be used.