13
Table 3, Z-Class Pump Model Matrix • Firmware 7.x • Pump Types 1, 2, 3, 6, 8 and 10
Pump
Type.
Pump
type
Pump type
code
pendant
Item
Motor
On/Off
Arrow
down
Arrow up
Motor
On/Off
What happens when _____ button is pushed in
normal operation mode (“READY” is displayed on LCD)
Pendant Button
LCD Panel
Button
Action when HI_PRESS
(SET_PRESS) value is
reached
Max value
for HI_PRESS
Additional comments
valve
Action when LO_PRESS
value is reached
Max value for LO_PRESS
foot
switch
10
Manual
Momen-
tary
Pump
ZxxxxxWx
3-button
none
Motor & Fan
(if attached)
Solenoid A
Solenoid B
Momentary
On
(no toggle)
no
change
no
change
no change
off
no change
momentary on
Note: Motor may
be on or off
(advance)
off
toggle
on/off
(see note 1)
off
off
when HI_PRESS is reached
only the valve shuts off,
motor continues running
off
off
10,500 psi
Similar to pump No. 6 execpt that LOCAL MODE
is the default at start-up. Pendant buttons are
disabled.
(See Note 2)
VE33 / VE43
none
na
on
off
na
50 psi less than HI_PRESS current
value. 0 means LO_PRESS is
turned off
na
Option
momentary
on
Note: Motor
may be
on or off
(retract)
Operation with Automode ON
Pumps Equipped with Pressure Transducer Option Only
Notes - Pump Type 10:
1. if Automode is OFF, motor is momentary on (no toggle).
2. If Automode is OFF, solenoids can be operated manually when motor is off or on.
Table 4, Z-Class Pump Model Matrix • Firmware 7.x • Pump Types 1, 2, 3, 6, 8 and 10
(Continued from previous page)
To Next Page
Loading...
