12
Pump
Type
1
2
3
6
Pump
type
manual
w/LCD
Adv /
Hold /
Ret
Dump
remote
3/4-way
Pump type
code
ZxxxxxLx
ZxxxxxHx
Zxx2xxSx
Zxx1xxDx
Zxx3xxSx
Zxx4xxSx
ZxxxxxWx
pendant
none
3-button
1-button
3-button
none
Item
Motor & Fan
(if attached)
Motor & Fan
(if attached)
Solenoid B
Motor & Fan
(if attached)
Solenoid A
Motor & Fan
(if attached)
Solenoid A
Solenoid B
Motor
On/Off
na -
no
pendant
na -
disabled
na -
disabled
na -
disabled
na -
disabled
toggle
on/off
no
change
no
change
Arrow
down
na -
no pendant
na - disabled
momentary
on (retract)
na - disabled
na - disabled
no change
off
momentary
on (retract)
Arrow up
na -
no pendant
momentary on
(advance)
na - disabled
momentary on
(advance)
momentary on
(advance)
no change
momentary on
(advance)
off
Motor
On/Off
toggle
on/off
off
off
off
off
toggle
on/off
off
off
off
off
off
off
off
when HI_PRESS is reached
only the valve shuts off,
motor continues running
off
off
10,500 psi
10,500 psi
10,500 psi
10,500 psi
3 button pendant used but only Up and Down
Arrow buttons are active
up-arrow now on the middle button-position,
using pin #2 of pendant
Pump type 6 is the default factory setting. 0
means LO_PRES is turned off. Default
manufacturer setting is AUTO MODE off &
LO_PRESS is 0
What happens when _____ button is pushed in
normal operation mode (“READY” is displayed on LCD)
Pendant Button
LCD Panel
Button
Action when HI_PRESS
value is reached
Max value
for HI_PRESS
Additional comments
valve
any manual
VE32
VE32-D
VE33 / VE43
none
on
on
na
na - can not change
LO_PRESS value from off
na - can not change
LO_PRESS value from off
na
on
off
Action when LO_PRESS
value is reached
50 psi less than HI_PRESS current
value. 0 means LO_PRESS is
turned off.
50 psi less than HI_PRESS current
value. 0 means LO_PRESS is
turned off.
na - can not change LO_PRESS
value from off
na
50 psi less than HI_PRESS current
value. 0 means LO_PRESS is
turned off
na
Max value for LO_PRESS
Operation with Automode ON
Pumps Equipped with Pressure Transducer Option Only
foot
switch
NA
Option
Option
Option
8 Jog ZxxxxxKx
1or2-
button
Motor & Fan
(if attached)
toggle
on/off
momentary
on
momentary on
toggle
on/off
off
10,500 psi
safety feature: Arrow-up and arrow-down
buttons switch off motor when pump is running
on toggle-on
any manual
on
50 psi less than HI_PRESS current
value. 0 means LO_PRESS is
turned off.
Option
Table 4, Z-Class Pump Model Matrix • Firmware 7.x • Pump Types 1, 2, 3, 6, 8 and 10
(Continued on next page)
To Next Page
Loading...
