Enertech Bentone B 2 Series - General; Table of Contents

To Next Page

To Previous Page

3 Bentone B 2

General

Table of contents

GENERAL 3

Important to think about! _____________________________________________4

Safety instructions ______________________________________________________4

Warning ____________________________________________________________________4

Electrical safety __________________________________________________________5

Assembly and Service _________________________________________________5

Condensation in the ﬂue ______________________________________________5

Measures to increase the temperature __________________________5

Adjusting the burner ___________________________________________________5

1. TECHNICAL DATA _________________________________________________ 6

1.1 Dimensions B 2 _____________________________ 6

1.1.1 Dimensions ﬂanges _______________________ 6

1.1.2 Recommended nozzles and pressures _______ 6

1.2 Model B 2 KA / Model B 2 KAV ________________ 7

1.2.1 Burner output ____________________________ 7

1.2.2 Setting the ignition electrodes ______________ 7

1.3 Model B 2 KS 76/24 / Model B 2 KSV 76/24 ____ 8

1.3.1 Burner output ____________________________ 8

1.3.2 Setting the ignition electrodes ______________ 8

1.4 Nozzle table, 8–15 bar _______________________ 9

1.4.1 Burner with preheater _____________________ 9

1.5 Description ________________________________ 10

1.5.1 Components ____________________________ 11

2. INSTALLATION _____________________________________________________ 12

2.1 Acceptance inspection ______________________ 12

2.2 Preparations for installation __________________ 12

2.3 Distribution of oil ___________________________ 12

2.4 Electrical connections _______________________ 12

2.5 Choice of nozzle ___________________________ 12

2.6 Setting of the brake plate and air ﬂow__________ 12

3. BASIC SETTINGS ________________________________________________ 13

3.1 Burner output without preheater B 2 KA / B 2 KS 13

3.1.1.1 Adjustment of the nozzle assembly ________________ 13

3.1.1.2 Air adjustment _________________________________ 13

3.1.1.3 Pressure in front of the brake plate ________________ 13

3.2 Burner output with preheater B 2 KAV / B 2 KSV 14

3.2.1.1 Adjustment of the nozzle assembly ________________ 14

3.2.1.2 Air adjustment _________________________________ 14

3.2.1.3 Pressure in front of the brake plate ________________ 14

4. BURNER SERVICING __________________________________________ 15

4.1 Cleaning the fan wheel ______________________ 15

4.2 Trimming __________________________________ 15

4.3 Automatic air damper _______________________ 15

4.4 Suspension of burner _______________________ 16

4.5 Removing the blast tube _____________________ 16

4.6 Brake plate ________________________________ 16

4.7 Rubber cable ______________________________ 16

4.8 Service position electric package _____________ 17

4.9 Pump ﬁlter ________________________________ 17

5. PUMP INSTRUCTIONS _______________________________________ 18

5.1 Suntec AS47CK____________________________ 18

5.1.1 Technical data __________________________ 18

5.1.2 Components ____________________________ 18

5.1.3 Filter replacement________________________ 18

5.1.4 One-pipe system ________________________ 18

5.1.5 Function AS47CK _______________________ 19

5.1.6 Suction pipe tables AS47CK ______________ 20

5.1.6.1 Overhead Tank _________________________________ 20

5.1.6.2 Underlying Tank ________________________________ 20

5.2 Danfoss BFP41L3 __________________________ 21

5.2.1 Technical data __________________________ 21

5.2.2 Components ____________________________ 21

5.2.3 Venting ________________________________ 21

5.2.4 Changing cartridge ﬁlter __________________ 21

5.2.5 BFP41L3 operating principle ______________ 22

5.2.6 Suction pipe tables BFP41L3 ______________ 23

5.2.6.1 Overhead Tank _________________________________ 23

5.2.6.2 Underlying Tank ________________________________ 23

6. PREHEATER ________________________________________________________ 24

7. ELECTRIC EQUIPMENT LMO1..2..4..

_______________ 25

7.1 Wiring diagram _____________________________ 25

7.1.1 List of components ______________________ 26

7.1.2 Function LMO1..2..4.. ____________________ 26

7.1.3 Technical data __________________________ 27

7.1.4 Colour codes LMO14/24 _________________ 28

7.1.5 Fault codes LMO14/24 ___________________ 28

8. FAULT LOCATION _______________________________________________ 29

8.1 Burner will not start _________________________ 29

8.2 Burner will not start after normal use __________ 29

8.3 Delayed ignition, burner starts; pulsation _______ 29

9. DECLARATION OF CONFORMITY ____________________ 30

10. OIL BURNERS MAINTENANCE INSTRUCTIONS

Main Page