Enertech Bentone B 2 Series - 1 Technical Data; Dimensions B 2; Dimensions Langes; Recommended Nozzles and Pressures

6
Bentone B 2
General
10,5
ø89,5
130-150
21
1. TECHNICAL DATA
1.1 Dimensions B 2
1.1.1 Dimensions flanges
1.1.2 Recommended nozzles and pressures
Because of the different types of boiler in existence, with varying furnace
geometries and furnace loads, it is not possible to commit to any given spray
angle or spay pattern. Note that spray angles and spray patterns change
with pump pressures.
Nozzle
60° Solid/Hollow cone
80° Solid/Hollow conel
Pump pressure
10 bar (8–14 bar) Light oil 1
10 bar (7–12 bar) Kerosene